APG6000
Line source matrix system
2 enclosures – 4 acoustic ways
3 x 15" Neodymium cone drivers (4" coil)
2 x APG ISOTOP™ coaxial drivers (5°V)
The APG6000 belongs to APG’s family of Matrix Array. The collinear technology of the Matrix Array technology is the foundation of the Matrix sound design concept i.e. the ability to create coherent configurations thanks to the simultaneous control of horizontal and vertical coverage.
The APG6000 comprises two individual speakers, 6000HI and 6000LO, which share the same external dimensions for easy mechanical assembly. It is designed for vertical line source coupling and long throw coverage. The dynamic capacity of the APG6000 and its impressive SPL-to-size ratio makes it one of the most powerful systems in the market. Based on the same ergonomics as the APG4000 system, the APG6000 is the dedicated long-throw complement for the APG4000. It is ideal for high power F.O.H applications, either on tour or in fixed installations, and for both indoor and outdoor use.
The complete ergonomics of the speakers, the hanging and transportation systems are all fully optimised to facilitate setup in touring conditions. The APG4000 and APG6000 systems are both compatible and complementary. They use the same internal components and technologies. They have in common the same horizontal dispersion angles, the same installation principles and the same connectors and flying systems. For very low frequency extension, the recommended subs are: TB218S and TB118S.
Features
• Exclusive IsotopTM technology
• High directivity index (60°H by 5°V)
• Exceptional SPL
• Integrated flying system
Applications
• High precision long throw coverage
• Fixed installation
• Indoor or outdoor
• Long-throw complement to APG4000
| Technical characteristics | 6000HI | 6000LO |
|---|---|---|
|
Acoustic way / Mode Transducer (Ø coil) |
3 way / bi amp 1x15"ND (4")** 2xIsotop5TM |
1 way / mono amp 2x15"ND (4")** |
|
Bandwidth @ -3dB Directivity @ -6dB |
65Hz - 19kHz* 60°H x 5°V |
45Hz - 160Hz* |
|
Nominal Impedance Power AES Recommended amplification |
mid : 8 Ohm hi : 16 Ohm mid : 1150W hi : 350W mid : 1150W to 2300W hi : 350W to 700W |
2 x 8 Ohm 2 x 1150W 2 x 1150W to 2300W |
|
Efficiency dB SPL @1W/1m Continuous dB SPL level @1m dB SPL peak level @1m*** |
mid : 104 hi : 112 138 144 |
104 137 143 |
|
Dimensions (H, W, D) Weight |
520 x 750 x 780 mm 67 kg |
520 x 750 x 780 mm 53 kg |
* full range mode with processor ** ND = magnetic neodimuim compression driver *** AES2 Norrm 1984 ****AES2 Norm 2012
| Options | ||
|---|---|---|
|
6TRUSS |
 |
Rigging Truss for 4000 & 6000 systems |
|
6000PR |
Wheelboard for 4000 & 6000 speakers |
|
| 6LB |  |
Lift bar + 2 shackles for 2 columns of Matrix Array |
| 6RCAV |  |
Front vertical rigging piece for Matrix 6000 speakers |
| 6RCAR | Rear vertical rigging piece for Matrix 4000 and 6000 speakers | |
| 6RAAV | Front horizontal coupling piece for 6TRUSS | |
| 6RAAR |  |
Rear horizontal coupling piece for 6TRUSS |
| QRP23EL |  |
Quick Release Pin L=23mm with sling (4000 and 6000 backside) |
| QRP43EL | Quick Release Pin L=43mm with sling (front 6000) |
| Electronics | ||
|---|---|---|
|
DMS48F |
 |
Digital speaker controller 4in, 8 out |
|
SA30:2 |
 |
APG switch mode amplifier, 2 x 2600 W into 4 ohm |
|
DA50:4 |
 |
APG DSP amplifier, 4 x 3000 W into 4 Ohm |