iX15-O
High power installation loudspeaker - Outdoor
Two-way coaxial, bass-reflex
1x15’’ ventilated cone driver
1.4” HF driver
IP 54
The APG iX15-O model is a stand-alone two-way unit for pure coaxial installation. The bass/medium range is handled by an elongated 15'' speaker with a magnetic driver which uses a proprietary forced thermal cooling technology which makes it possible to reduce the losses inherent to thermal compression.
The 1.4” HF driver is connected via an original passive filter which also makes it possible to minimise the energy loss in the passive components. These technologies bring about a very high dynamic capacity from the low right through to the very highest frequencies. The front face of the cabinet is designed to form a zero-diffraction baffle and obtain a consistent, linear acoustic field.
The iX15-O stands out due to its acoustic performance at every level : dynamic capacity, sound reproduction quality, linearity of amplitude, both in terms of phase and directivity. In terms of ergonomics, the iX15-O is optimised for fixed installations. It has a streamlined trapezoidal design, built-in connectors SpeakonTM and metal inserts for wall or ceiling mounting using the accessory IX15BV-O or IX15BH-O.
Features
- Exceptional size/power ratio
- High acoustic precision
- All-round ergonomics for fixed installation
Applications
- Short and medium throw coverage FOH system
- High power sound system
- Dispersion and immersive sound
| Technical features | |
|---|---|
|
Usable bandwidth (± 10 dB)
SPL max @ 1m
Nominal directivity (H° x V°)
Nominal impedance |
45 Hz - 20 kHz
136 dB SPL (1)
90° x 90° (2)
8 ohm |
|
Transducers Topology Type of load Way and amplification section |
1 x 15'' coaxial ventiled - 1 x 1,4'' HF ND driver Coaxial - APG NDB Baffle Bass Reflex 2 ways, mono amplified |
|
AES power (W) Maximum power handling (W) |
550 W (3) 2200 W (4) |
|
Dimensions H,W,D (mm) Weight (kg) Connectors IP |
17,3" x 25,9" x 14,8" (440 x 660 x 377 mm) 50,7 lb (23 kg) 2 x Gland connector 54 |
(1) Peak level @ 1m, 2πsr using 12dB crestfactor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR
| Accessories & Options | ||
|---|---|---|
|
iX15BV-O |
 |
Fixing bracket for iX15-O |
|
iX15BH-O |
 |
Fixing bracket for iX15-O |
|
T200 |
Line transformer 70V/100V, 200W |
| Electronics | ||
|---|---|---|
|
DMS48F |
 |
Digital processor, 4 inputs /8 outputs (DMS48F-D, DANTE version) |
|
DA8 |
 |
APG DSP amplifier, 4 x 2000 W @4 Ohms |
|
DA12 |
|
APG DSP amplifier, 4 x 3000 W @4 Ohms |
|
QUATTROCANALI |
 |
Quattrocanali range |