iS115
Compact Subwoofer
1 x 15" Neodyme (3" voice coil)
Bass Reflex
The iS115 is an extremely compact and efficient subwoofer for either fixed installations or mobile applications.
It features a single 15" neodymium cone driver. This exclusive design significantly reduces the volume of the acoustic load in order to obtain the best size / low cutoff frequency ratio as well as a significant efficiency gain in terms of useable bandwidth and perfect membrane movement control. This driver takes advantage of a forced thermal cooling, which drastically reduces thermal compression, resulting in high sound pressure capacity.
In terms of ergonomics, the iS115 features two integrated handles, recessed input connectors, a pole-mount point and protective skids. The iS115 should be exclusively used with APG processors and amplifiers for which they are recommended.
Features
• Minimum height and width
• Accuracy in low frequency reproduction
• Sonic impact and precision
Applications
• Very compact mobile system
• Unobtrusive in fixed installations
• Stage monitoring drum fill
| Technical features | |
|---|---|
|
Usable bandwidth (± 10 dB)
SPL max @ 1m
Nominal directivity (H° x V°)
Nominal impedance |
42 Hz - 120 Hz
138 dB SPL (1)
Omnidirectionnal (2)
8 ohm |
|
Transducers Topology Type of load Way and amplification section |
1 x 15'' Neodyme - Bass Reflex 1 way, mono amplified |
|
AES power (W) Maximum power handling (W) |
900 W (3) 3600 W (4) |
|
Dimensions H,W,D (mm) Weight (kg) Connectors IP |
14,7" x 23,5" x 27,1" (375 x 598 x 690 mm) 72 lb (32,7 kg) 2 x Speakon NL4MP (5) 43 |
(1) Peak level @ 1m, 2πsr using 12dB crest factor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5) SPEAKON connectors are wired hot pin 1+, cold pin1- (2+ and 2- THRU)
| Accessories & Options | ||
|---|---|---|
|
iS115BH |
Hanging bumper for iS115 |
|
| LKiS115-iX12 | iS115 to iX12 connection accessory | |
| SCiS115 | Soft case for 1 x iS115 |
| Electronics | ||
|---|---|---|
|
DMS48F |
 |
Digital processor, 4 inputs /8 outputs (DMS48F-D, DANTE version) |
|
DA8 |
 |
APG DSP amplifier, 4 x 2000 W @4 Ohms |
|
DA12 |
|
APG DSP amplifier, 4 x 3000 W @4 Ohms |
|
QUATTROCANALI |
 |
Quattrocanali range |